Belle Epoch Deluxe Expression Pedal Compatibility

 

Using an expression pedal unlocks the live performance potential of your new Belle Epoch Deluxe!

You can control delay time, echo volume, rotary speed, or filter sweep from an expression pedal. And when combined with the user-tunable Echo Oscillation footswitch and/or the internally switchable trails/true-bypass mode, all kinds of new sonic vistas are available!

 

TRS expression pedal. Ring to wiper. Sleeve to ground. Tip to 3.3v.

WARNING: Do not plug a tip-sleeve plug (like a standard guitar or speaker cable plug) into expression pedal jack.

(Some models, such as Dunlop Volume X series have an internal switch to swap Tip/Ring. Dunlop ships with Tip to wiper so the internal switch must be flipped.)

Linear taper is recommended for the best sweep.

B10k or B25k are common. Pot value not critical.

 

We recommend springing for a high-quality metal-bodied one if you will be using it for live performance. While the less expensive plastic bodied ones work they aren’t very accurate and it’s hard to keep a setting from moving when you lift your foot.

 

Belle Epoch Deluxe Expression Pedal Compatibility

This is a list we are continually building on. If you have anything to share feel free to contact customer service.

Email Customer Service: erksin@catalinbread.com

 

M-Audio
Set bottom toggle to “Other”.
Set external side trimmer to full CCW.
Now use external side trimmer to adjust min vol or delay time (full heel)

Moog
Set bottom toggle to “Other”
Set external side trimmer to full CW.
(Side trimmer is not useful for the BEDlx.)

Roland EV-5
Set external side trimmer to full CCW.
Now use external side trimmer to adjust min vol or delay time (full heel)
We’ve noticed some units have poor quality pots so the pedal can’t achieve full min or max settings.

Dunlop Volume Series (XL, X, X Mini)
RECOMMENDED BY CATALINBREAD
Remove bottom plate and push down blue toggle switch from factory setting.
Trimpot sets min vol or delay time (full heel)

 

Morley M2 Mini Expression Pedal

Use “ALTERNATE” jack.

Leave a Reply